-
What length of tape should be used for gripping clubs?
Use a piece of tape the same length as the grip. A ¼” of tape will be pushed into the end of the shaft and this will ensure your grip tape doesn’t extend beyond your grip.
-
What type of solvents can I use with this tape?
We recommend using HF-100 Grip Solvent. It is safer and more cost effective than other solvents.
-
Can water be used with this tape?
No, all our tapes are solvent based.
-
Can mineral spirits be used with this tape?
Yes, but using mineral spirits can be hazardous. We recommend using HF-100 Grip Solvent. It is safer, nonflammable and more cost effective.
-
How thick is this tape?
591 Intertape is 7 mil
Brampton Grip Tape is 6 mil
-
What is the best way to remove the old tape and why is it needed?
We recommend using the Uneekscraper, especially on graphite, to avoid damaging the shaft. Using a heat gun can help soften the old tape making to easier to remove completely.
-
Can this tape be used to build up my grips?
Yes, but it is more cost effective to use masking tape on the inner layers and then use grip tape on the final layer.
-
What type of shaft materials is this tape compatible with?
This tape can be used with all shaft types.
-
Why won’t the tape stick to the club shaft?
In some instances, there can be residual amounts of oil or slippery containments left on the shaft that will not allow the tape adhesive to stick to the shaft. If this occurs wipe down the affected area with Denatured Alcohol.
-
Is this tape sticky on both sides?
Yes, all our grip tapes are coated on both sides with an aggressive, pressure-sensitive natural rubber adhesive.
-
Does this tape have a double liner?
Tape rolls have one easy release treated crepe paper liner.
Pre-Cut tape strips have two easy release liners, be sure to remove both liners from the strips during installation.
-
Are the tape strips scored down the center to make removal of the liner easier?
Yes, the pre-cut tape strips are scored to aid in the removal of the liner.
Grip Tape Strips
Brampton grip tape is a high-quality product made in the USA and is the most price competitive tape in the golf industry. It is an economical tape that is used in many repair shops for golf grip installation.
Whether you’re a seasoned golfer or an amateur enthusiast, our grip strip offers unbeatable adhesion and straightforward application, making regripping your clubs a breeze. This ensures that your grips will remain securely in place.
The user-friendly nature of our grip strip also means less downtime and more time on the course, giving golfers a competitive edge. Discover the superior adhesion and user convenience of our grip tape strip.
- 6 mil thickness (w/o liner)
- Natural rubber adhesive
- Quick stick to steel
Description
Brampton® Grip Tape Strips
A beige crepe paper tape coated on both sides with an aggressive, pressure-sensitive natural rubber adhesive that bonds equally well on both sides to almost any surface. Features an easy release treated white crepe liner.
Backing: Crepe Paper
Adhesive: Natural Rubber/Resin
Adhesion to Steel (oz/in of width) PSTC-101: 47 (12.8 N/25mm)
Tensile Strength (lbs/in of width) PSTC-131: 23 (101 N/25mm)
Elongation (% at break) PSTC-131: 8.5
Total Thickness (mils) PSTC-133:
With liner 10.4 (0.26mm)
Without liner 6.0 (0.15mm)
Quick Stick to Steel (oz/in of width) PSTC-5: 20 (5.5 N/25mm)
Color: Beige
Sizes:
15pcs – 2” x 10” strips, 60pcs – 2” x 10” strips