We recommend using HF-100 Grip Solvent.  It is safer and more cost effective than other solvents.

No, all our tapes are solvent based.

Yes, but using mineral spirits can be hazardous.  We recommend using HF-100 Grip Solvent.  It is safer, nonflammable and more cost effective.

591 Intertape is 7 mil

Brampton Grip Tape is 6 mil

We recommend using the Uneekscraper, especially on graphite, to avoid damaging the shaft.  Using a heat gun can help soften the old tape making to easier to remove completely.

Yes, but it is more cost effective to use masking tape on the inner layers and then use grip tape on the final layer.

This tape can be used with all shaft types.

In some instances, there can be residual amounts of oil or slippery containments left on the shaft that will not allow the tape adhesive to stick to the shaft.  If this occurs wipe down the affected area with Denatured Alcohol.

Yes, all our grip tapes are coated on both sides with an aggressive, pressure-sensitive natural rubber adhesive.

Tape rolls have one easy release treated crepe paper liner.

Pre-Cut tape strips have two easy release liners, be sure to remove both liners from the strips during installation.

Yes, the pre-cut tape strips are scored to aid in the removal of the liner.